Beipu devices atomiser heads for pod fans (RELX Pro)
Beipu devices advice for Bulgaria, covering atomiser heads, what to look for and where the trade-offs actually sit.
Budget matters in Bulgaria, but with beipu devices the cheapest option is rarely the one that lasts. Two things to check before ordering: the Micro-USB socket on the base and whether the 0.2 Ω dual mesh coil is the newer generation.
We spent weeks putting beipu devices options through their paces so the recommendations here reflect real use. Expect roughly 822 full puffs from a charge at 20 mg/ml, based on average session length in our testing.
The build quality on Innokin Sceptre is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Micro-USB takes about 79 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Replacement coils are widely available, and the 0.2 Ω dual mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.2 Ω dual mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber.
Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
For pod fans, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 20:80 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Innokin |
| Battery capacity | 2000 mAh |
| Power range | 150 W |
| Liquid capacity | 1.6 ml |
| Coil | 0.2 Ω dual mesh |
| Bottle size | 1.3 ml |
| Liquid ratio | 20:80 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | polycarbonate |
| Charge port | Micro-USB |
| Connector | magnetic contact |
| Airflow | fixed |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Cola Zero: sweet, fizzy, described as cola sweetness with a light fizz. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.2 Ω dual mesh mark before the coil begins to mute it.
Practical considerations in Bulgaria
Availability in Bulgaria is the factor that decides most outcomes here. Confirm the 0.2 Ω dual mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and BGN rates move, so treat prices as current rather than fixed.
If you would rather talk it through, use the contact details below and we will answer directly.
